Item New UR-FR5000 50 VHF 136-174mhz watt 32 channel IDAS digital analog repeater and/or channel extension module. This repeater can be used as a stand alone repeater or added to a Icom FR5000 repeater to make a 2 channel repeater or trunking system. Features IDAS bridges the gap between analog and digital systems IDAS is Icom's digital land mobile radio system using the NXDN common air interface. It has useful calling features including selective calling, status message, radio stun/kill/revive and GPS position reporting, etc. The IDAS system is ideal for business and industry users who may want to migrate to a digital system or to the future FCC mandated narrow band spacing.
MultiTrunk now available IDAS mult-site operation has now expanded to trunking! Add a UCFR5000 and the new CF-FR5000MT card and many IDAS trunking sites can be interconnected to create a large roaming coverage area using IP.
MultiTrunk Benefits: Scalable from 1 channel to 30 channels per site, up to 16 sites Effective operations with all channels used to transmit voice or data payload, priority monitoring for emergency interrupt, and polite roaming while conversations are occurring All the features of a digital radios, like text, GPS and group/individual calls available in multi-site trunking Best value on the market for a multi-site trunking system Double your channel capacity IDAS doubles the capacity of the current 12.5kHz channel allocation. Icom allows you to meet any narrow banding requirements today, and provides a solution to any future spectrum deficiencies. Digital/analog mixed mode operation The IC-FR5000 series can receive both analog and digital signals on a single channel. You can partially introduce the IDAS system, while using the existing analog radios in a system. The IDAS system allows you to scale migration to narrow band digital at your own pace and need.Improved audio quality The IDAS system occupies only 6.25kHz spacing per channel. With the improved sensitivity of narrow band communications, increased communication greater than 12.5kHz analog mode can be achieved. The IDAS system uses the AMBE+2 codec, which provides clear audio and simultaneous data communication. Network interface The IDAS repeater has a network interface and can be connected to a LAN or the Internet via Ethernet cable. Communication range is vastly extended by the Internet connection and eliminates the need for expensive leased lines. When connected to a PC via a LAN or the Internet, you can remotely maintain the repeater configuration remotely from your PC. Option (Available in the future) Digital trunking capability The repeater will also have digital trunking capability in the near future.
This will allow you further effective channel management by sharing a minimum of channels with a large number of users. Some features are planned and released in the future. 19-inch rack mount 2U height low profile design The IC-FR5000 series uses only 2U height.
This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency. Two RF channel modules in one unit Two RF modules can be installed in a chassis to reduce installation space, while the RF modules can be programmed and operated independently. LEDs on the front panel show both channel conditions. 50W output at 50% duty cycle, 25W 100% duty cycle operation Employing a high stability ±0.5ppm oscillator and high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output.
When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle. Multiple CTCSS, DTCS tone and RAN code decode The IC-FR5000 series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code.
This function is useful for sharing a channel with multiple groups and provides quiet stand-by while using other groups. Superior receiver performance The IC-FR5000 series has class leading receiver performance of selectivity and intermodulation rejection.It improves the quality of the repeater service even under congested band conditions. D-SUB 25-pin accessory connector The IC-FR5000 series has a programmable D-SUB 25-pin accessory connector for connecting various trunking controllers or external remote control devices. Also, modulation/ demodulation signals can be input/ output from the D-SUB connector. Voice scrambler The built-in inversion type voice scrambler provides secure conversation as stadard. When a more secure system is required, the 32 coded non-rolling type voice scrambler UT-109R and 1020 code rolling type UT-110R are available as an option. In IDAS digital mode, a 15-bit encryption key provides over 32,000 scrambling codes. These voice scramblers (inversion type, UT-109R and UT-110R) are available with analog mode only. Built-in audio compander The built-in audio compander improves the signal to noise ratio and provide clear audio. Other features PTT priority setting Local Mic. Please refer to the return section of this listing for details and eligibility. We are proud of the fact that we get 99% of the orders to our customers within 3-days. SUPPORT: We are an authorized two way radio dealer with a retail location in Orange County, California. We are here to provide each customer with first class service. We strive to ensure our customers are 100% satisfied.
Thanks for viewing this listing! Please view our website for more great deals!
The item "ICOM UR-FR5000 IDAS Repeater 50W 32CH 136-174MHZ VHF HAM Police Fire Module" is in sale since Monday, August 11, 2014. This item is in the category "Consumer Electronics\Radio Communication\Walkie Talkies, Two-Way Radios". The seller is "surplusradios" and is located in Santa Ana, California. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand, Egypt, Reunion.